一 應用
適用于高溫下易分解，聚合和變質的熱敏性物料的低溫干燥，被廣泛的采用在制藥、化工、食品、電子等行業。
二 原理
所謂的真空干燥，就是將干燥物料處在真空條件下，進行加熱干燥，并利用真空泵進行抽氣抽濕，加快了干燥速率。
三 特點
1.真空下物料溶液的沸點降低，使蒸發器的傳熱推動力增大，因此對一定的傳熱量可以節省蒸發器的傳熱面積。
2.蒸發操作的熱源可采用低壓蒸汽或廢熱蒸汽。
3.蒸發器熱損失少。
4.在干燥前進行干燥處理，干燥過程中無任何不純物混入，符合GMP要求。
5.屬于靜態真空干燥器，故干燥物料的形體不會破壞。
One application
Applicable to high temperature decomposition, dry heat sensitive material polymerization and metamorphose, is widely used in pharmaceutical, chemical, food, electronics and other industries.
Two principle
The so-called vacuum drying, is to dry material in vacuum conditions, heating drying, and use vacuum pump pumping suction wet, accelerate the drying rate.
Three characteristics
1. under vacuum, the boiling point of the material solution is reduced, so that the heat transfer driving force of the evaporator is increased. Therefore, the heat transfer area of the evaporator can be saved by a certain heat transfer.
2. evaporation heat source can use low pressure steam or waste heat steam.
The heat loss of 
3. evaporator is less.
4. drying before drying, without any impurity in the drying process, meet the requirements of GMP.
5. belongs to the static vacuum dryer, so the dry material form will not destroy.
想了解更多關于干燥設備的相關信息，請持續關注無錫豐華干燥設備有限公司官網www.dourfe.cn