干燥設備干燥時可以分為幾個階段？如果我們假設物料是不變的，不會發生化學反應的話，那么干燥設備會對物料進行4個階段的干燥，具體階段如下：
1、升速干燥階段：就是用非常高的溫度在比較短的時間內把物料表面的水分給蒸發掉，這一階段所需的時間比較短，但也局限于表面的水分，所以這一階段的出水量是不大的。
2、等速干燥階段：到這一階段就是對物料加熱，讓物料內部的水分慢慢向表面補充，由于物料表面正受的高溫的加熱，所以物料表面的水分蒸發的很快，當物料內部向表面補充水的速度跟不上物料表面水分蒸發的速度的時候，就進入了降速干燥階段。
3、降速干燥階段：這一階段的物料水分已經被蒸發的一大半，在此階段也就是對物料慢慢干燥了，慢慢把物料內部的水分給逼到表面被蒸發掉。
4、平衡干燥階段：當物料內部的水分被逼干，再也沒有水分往表面補充的時候，就進入了平衡干燥階段，這一階段也就是物料被干燥后得到成品的階段。
Drying equipment can be divided into several stages when it is dry If we assume that the material is constant and there will be no chemical reaction, then the drying equipment will dry the material in 4 stages, the following stages are as follows:
1, speed up drying stage: that with very high temperature in a relatively short period of time, the material surface water to evaporate, the required time is short, but also limited to the surface of the water, so the water content in this period is small.
2, drying stage: this stage is the material heating, let the material inside the water slowly to the surface, because the heating surface is affected by the high temperature material, so the material surface water evaporates quickly, when the material to supplement water surface can't keep pace with material moisture evaporation. The entered the drying phase.
3, slow down drying stage: at this stage of the material moisture has been evaporated more than half, in this stage is the material slowly dried, slowly to the internal moisture of the material to the surface is evaporated.
4, the balance of dry stage: when the water forced dry material, no water to the surface of the balance into the dry stage, this stage is the material is dried to obtain the finished stage.
想了解更多關于干燥設備的相關信息，請持續關注無錫豐華干燥設備有限公司官網www.dourfe.cn